Linear Shaft Motor 50% More Efficient than Coreless Linear Servos

Nippon Pulse’s Linear Shaft Motor is the first linear servomotor designed and constructed with the ultra high-precision market in mind, but also provides energy efficiency that is up to 50 percent better than competing coreless linear motors, a claim independently verified (see below).

Nippon Linear Shaft Motor Family

The simple design of the Linear Shaft Motor (it consists of only a forcer {coils} and shaft {magnet}), is one of the primary factors in its energy efficiency. Because the coils are completely wrapped around the magnets, 100 percent of created magnet flux cuts the coils at 90 degrees, which, as highlighted by Fleming’s left hand rule, is the optimal crossing vector in linear motion.

The Linear Shaft Motor also reduces the amount of generated heat, and heat’s impact on the work point, which further increases energy efficiency. The decreased impact of heat also is a factor in the Linear Shaft Motor’s ability to achieve sub-micron resolution.

Other factors improving the energy efficiency of the Linear Shaft Motor include the absense of cogging and Eddy currents, stiffness up to 100 percent better than competing coreless motors, and the lack of inherent air flow restrictions.

An independent study conducted by the University of Virginia in October of 2010 confirms the Linear Shaft Motor is at least 50 percent more efficient than comparable u-shaped motors.

Features of Nippon Pulse’s high efficiency Linear Shaft Motor include:
  • Two-part simple design, forcer (coils) and shaft (magnets)
  • Uses 100 percent of all magnetic flux, which cuts magnet at 90 deg.
  • Non-critical air gap, making machining easier and more cost efficient
  • High-speed (10m/s and acceleration up to 20G)
  • Low-speed (8um/s)
  • High thrust capabilities, up to 100,000N
  • Very low speed fluctuation (±0.006% at 100mm/s)
  • Allows for use in parallel using only one encoder and one drive
  • Operation ability within harsh environments and in vacuums
Key Design Features of the Linear Shaft Motor
The Linear Shaft Motor’s simple design is a key
factor in its energy efficiency.
Magnet flux cuts the coils at 90 degrees, the optimal crossing vector in linear motion (see Fleming’s left hand rule).

View the Linear Shaft Motor designed into a high-precision custom stage system at the following YouTube Link.  In addition to being more energy efficient, the Linear Shaft
Motor can also achieve sub-micron motion and is extremely accurate and precise.

For more information, please contact:      

Warren Osak
Toll Free Phone:   877-737-8698  
Toll Free Fax:       877-737-8699


0 Responses to “Linear Shaft Motor 50% More Efficient than Coreless Linear Servos”

  1. Leave a Comment

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s


Subscribe to this blog by entering your email address below.

Join 657 other followers

Hey there! Electromate is using Twitter.

Presentation Playlist

Flickr Photos

Maxon EC-i52

Tolomatic RSX Actuator

Tolomatic Actuator

Thomson Ball & Acme Screw Products

Tecnotion Linear Motor


SMAC LCA6 Actuator


Posital Fraba Tiltix Atex Inclinometer

Posital Fraba Profibus ATEX Certified Encoder

More Photos

Blog Stats

  • 53,658 hits

%d bloggers like this: