An Introduction To Plug-and-Play Motion Subsystems

Bell-Everman White Paper Reprint November 2015

Embedding mechanical motion subsystems into machines improves
performance and reduces cost.

If you build machines, you probably work with actuators and positioning stages every day.  But do you truly get the best performance or lowest cost of ownership from these motion devices?  The answer may not be what you expect.

All too often, engineers think of stages or actuators as just another item on the bill of materials.  As long as the motion device nominally meets the desired positioning, force, payload, speed and cost requirements, it’s good to go.

With simple motion requirements, this approach to stage or actuator selection may yield acceptable results.  However, machines with complex mechanical motion requirements will benefit from an embedded motion design strategy.  Rather than a collection of electromechanical components, which may or may not work well together, embedded motion systems function as true plug-and-play machine subsystems.

Embedded motion systems are engineered to fit within a predefined physical space on a machine and tie into the machine’s motion control system, ready to accept commands from a top-level computer interface, control card or PLC.  At their simplest, embedded motion systems may consist of little more than a stage or actuator that has been connectorized to make the drop-in installation easier.  At their most complex, these motion subsystems extend from pinout to payload.  They encompass not only the motion device itself but also everything it carries…

Click on the link below to download the remainder of this White Paper.

Bell-Everman White Paper

Click on the link below to download the Bell-Everman Product Catalog.

Bell-Everman Product Catalog

For more information, please contact:


Warren Osak
Toll Free Phone:   877-737-8698
Toll Free Fax:       877-737-8699

Tags:  Linear Actuator, Rotary Stage, Motion Subsystems, Embedded Motion Control, Electromate, Bell-Everman, Positioning Stage

0 Responses to “An Introduction To Plug-and-Play Motion Subsystems”

  1. Leave a Comment

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s


Subscribe to this blog by entering your email address below.

Join 676 other followers

Hey there! Electromate is using Twitter.

Presentation Playlist

Flickr Photos

Blog Stats

  • 62,295 hits

%d bloggers like this: