Posts Tagged 'SMAC'

New LCR16 Series Linear Rotary Actuator from SMAC Moving Coil Actuators

The LCR16 from SMAC Moving Coil Actuators provides precision Z-theta motion within one small actuator, which is ideal for a pick, orient and place applications. A wide variety of LCR16 linear rotary actuators are available with either direct drive or gearbox equipped rotary units.

The vacuum-built-in shaft through the rotary motor is available for some models to prevent dust build-up in the unit.  These z-theta actuators can easily be programmed to control force/torque, position and velocity in all axes at the same time with feedback capability.  SMAC’s unique, patented “Soft-Land” function enables the unit to gently land on a delicate component with a controlled force to avoid damage of both the component and the actuator.

The actuator is constructed with a direct drive brushless servo motor.  It’s designed with linear guide built-in lubrication to offer long life cycle.  Moreover, it provides absolute control over: force/torque, position, acceleration and velocity.

Features include:

  • Direct drive brushless servo motor
  • Combined linear and rotary motions in a single unit
  • Fully programmable in force/torque, position and velocity
  • SMAC’s Patented ‘Soft-Land’ Technology
  • Self-lubricated linear guide
  • Low shaft run-out, 30µm (Lower run-out optional)
  • Vacuum through shaft prevents dust accumulation
  • MTBF 100 million life cycle

Information on the LCR16 Series Linear Rotary Actuator from SMAC can be viewed at:
https://www.electromate.com/assets/catalog-library/pdfs/SMAC/SMAC_LCR16_Linear_Rotary_Actuator_Brochure.pdf

For further information, please contact:

EDITORIAL CONTACT:
Warren Osak
sales@electromate.com
Toll Free Phone:   877-737-8698
Toll Free Fax:       877-737-8699
www.electromate.com

 

Tags:  SMAC, LCR16, Linear Rotary Actuator, Moving Coil Actuator

Introducing the 35mm diameter CBL35C Programmable Electric Moving Coil Servo Actuator from SMAC Corporation

CBL35C

Introducing the 35mm diameter CBL35C electric cylinder with built-in controller from SMAC Corporation. With its built-in controller, the CBL35C controls force, position and velocity and features simple installation.

Ideal for applications with limited space but requiring accurate control, the CBL35C provides significantly longer life, programmability, high speed, accuracy, and energy efficiency while remaining price-competitive.

The new CBL35C series also enables the direct replacement of existing pneumatic cylinders and retrofits without any machine modifications required.

It‘s Graphical User Interface allows for easy straightforward setup of parameters and permits the user to change product profiles on the fly thereby improving factory uptime.

Features:

  • Built-in controller
  • Programmable position, velocity and force
  • Long life expectancy over 100 million cycles
  • Airless and quiet operation
  • Graphical User Interface is available for simple set-up
  • Space saving

Specifications:

  • Dimensions [mm]: Ø35 x 135 – 217(depending on stroke)
  • Stroke [mm]: 10, 25 (+1/-0)
  • Acceleration[G]: up to 50 (zero payload)
  • Peak Force [N]: up to 61
  • Encoder Resolution [µm]: 5 (standard) 1 & 0.1 (Options)
  • SMAC’s Patented: ‘Soft-Land’ Technology

Click below for more information.

SMAC’s CBL35C Programmable Electric Moving Coil Servo Actuator

For more information, please contact:

EDITORIAL CONTACT:
Warren Osak
sales@electromate.com
Toll Free Phone:   877-737-8698
Toll Free Fax:       877-737-8699
www.electromate.com

Tags:  SMAC, Electric Actuator, Electric Cylinder, CBL35C, Moving Coil Actuator, Electromate

CBL35C Series Electric Cylinder with Built-in Controller

SMAC CBL35C Programmable Electric Cylinder

SMAC CBL35C Programmable Electric Cylinder

Introducing the 35mm diameter CBL35C electric cylinder with built-in controller. The new CBL35C series electric cylinder with built-in controller in a single package enables the direct replacement of existing pneumatic cylinders and retro-fits without any machine modifications required. With our built-in controller, the CBL35C can control the force, speed and velocity profile. The CBL35C with built-in controller allows simple installation and effective use of space.

The CBL35C provides significantly longer life, programmability, high speed, accuracy and energy efficiency while remaining price-competitive. The CBL35C also provides more sustainable solution by not requiring costly compressed air.

Our Graphical User Interface is also available for the built-in controller for easy, straightforward setup of parameters. It allows you to change product profiles on the fly and improves factory uptime.

  • Dimensions [mm]: Ø35 x 135 – 217(depending on stroke)
  • Stroke [mm]: 10, 25 (+1/-0)
  • Acceleration[G]: up to 50 (zero payload)
  • Peak Force [N]: up to 61
  • Encoder Resolution [µm]: 5 (standard) 1 & 0.1 (Options)
  • SMAC’s Patented: ‘Soft-Land’ Technology

CLICK HERE to view more information on the CBL35C Programmable Electric Cylinder from SMAC Corporation.

For more information, please contact:

EDITORIAL CONTACT:

Warren Osak
sales@electromate.com
Toll Free Phone:   877-737-8698
Toll Free Fax:       877-737-8699
www.electromate.com

 

Tags: SMAC, Actuator, Moving Coil Actuator, Electromate, CBL35C, Electric Cylinder


Archives

Subscribe to this blog by entering your email address below.

Join 728 other followers

Hey there! Electromate is using Twitter.

Presentation Playlist

Flickr Photos

Blog Stats

  • 71,166 hits